Cookie Cutter STL Generator

Use BakePress when you need a practical cookie cutter STL file you can inspect before printing. Start from artwork or an idea, preview the model, and export a cutter file you can slice and test.

The free generator path is enough for many one-off files. Sellers and repeat makers can add full sets, multi-size output, mockups, batch tools, and saved export settings later.

What you can make

  • Image, logo, sketch, SVG, and idea inputs
  • Cutter, stamp, imprint, and full set options
  • Print-ready STL exports with 3D preview

Generate a usable STL without modeling cutter walls.

  1. Choose an image, logo, sketch, SVG file, or written idea.
  2. Generate a clean cutter outline and preview the geometry in 3D.
  3. Adjust practical size and wall settings for your printer.
  4. Export the STL and open it in your slicer.

Artwork and printing tips

  • The outline should be connected and sturdy.
  • Wall thickness should match your printer nozzle and material.
  • The cutter height should feel comfortable to press and remove.
  • The STL should slice cleanly before you use filament.

Frequently asked questions

What is a cookie cutter STL generator?
It is a tool that turns a 2D idea or image into a 3D STL file for a printable cookie cutter.
Can I generate a cookie cutter STL online?
Yes. BakePress runs in the browser and exports STL files for common 3D printing slicers.
Can I generate stamps and imprints too?
Yes. BakePress supports cutter, stamp, imprint, and full set workflows.
Do I need an SVG file?
No. SVG files can work well, but you can also start from images, logos, sketches, or text ideas.
Is the STL export free?
Cutter and Imprint Cutter STL exports are free on the Starter plan.
Where can I get free cookie cutter STL files?
There are two ways. Generate your own, since Cutter and Imprint Cutter STL exports are free on the Starter plan. Or open a ready-made design from the BakePress Freebies library, choose your size, preview it in 3D, and export the STL from the Studio.
Can I use it as a fondant cutter generator?
Yes. Set the size for the cake or cupcake piece you are cutting and export the cutter STL the same way. For detail pressed into the fondant, use an Imprint Cutter or a Stamp instead of a plain outline.